Audio Technica AT33 MONO Moving Coil Cartridge - NEW OLD STOCK

Audio Technica AT33 MONO Moving Coil Cartridge - NEW OLD STOCK - RRP £319

The AT33 Mono is made specifically for use on mono systems. It has a horizontal coil, and so in principle only generates electricity horizontally. 

The AT33 Mono produces sound to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records, producing audio that you couldn't possibly get from a stereo cartridge. 

The AT33 Mono also has appropriate compliance in the vertical direction, so will not cause damage to stereo records. Enjoy those well-known classic mono records with the AT33 Mono.

Features:

• Mono cartridge compatible with stereo playback systems
• Elliptical stylus chip and hard duralumin cantilever
• 10O middle impedance specification
• PCOCC coil prevents crystal gain boundary formation (in transmission direction)
• Strong body stabilised by a rigid body set-up 
• Hanenite anti-vibration rubber eliminates unnecessary vibrations. 
• High-quality sound / brass fastening screw. 

Specifications:

• Type: MC (Moving Coil)
• Playback frequency range: 20-20,000Hz
• Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
• Horizontal/vertical output ratio: 30dB (1kHz)
• Output balance: 1.0dB (1kHz)
• Stylus pressure: 2.3-2.7g (2.5g standard)
• Coil impedance: 10O1kHz
• DC resistance: 10O
• Load resistance: More than 100O (when head amp connected)
• Coil impedance: 28μH (1kHz)
• Static compliance: 20x10-6cm/dyne
• Dynamic compliance: 6x10-6cm/dyne (100Hz)
• Needle shape: Round needle (0.65mil)
• Cantilever: Duralumin pipe
• Vertical tracking angle: 23°
• Dimensions: H16xW16xD26.5mm
• Weight: 6.9g 
• Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm x2, Nut x2, Brush x1, PCOCC lead set x1